| 024/2008 | 01/24/08 | 05:00 - Low voltage on Polar caused a loadshed event where all instruments including TIDE were turned off. |
| 026/2008 | 01/26/08 | 13:34-14:51 Low voltage turned on, software patches loaded, and HV ramped. |
| 042/2008 | 02/11/08 | 15:30 - HV shutdown for Polar flip. |
| 044/2008 | 02/13/08 | 12:30-15:07 PSI gas flow test. Software patches were loaded (12:31-12:40), PSI turned on (12:47), the gas valve opened (12:49) and left open for 25 minutes. The gas valve was closed at 13:14. PSI was turned off at 15:07, after the low gas pressure dropped to zero. |
| 053/2008 | 02/22/08 | 21:27-22:23 - HV ramp after Polar flip. |
| 070/2008 | 03/10/08 | A Polar Spin precession (helium thrusting) maneuver was executed in several sessions on 03/10-17/08. |
| 095/2008 | 04/04/08 | Beginning at 00:55, the Stop MCP voltage changed from -1800 to -2000 V. |
| 107/2008 | 04/16/08 | 12:52 - TIDE high voltage was turned off for the last time. |
| 107/2008 | 04/16/08 | 16:17 - PSI was turned on and the gas valve opened in order to vent the remaining xenon gas. |
| 115/2008 | 04/24/08 | 18:25 - TIDE instrument reset. |
| 119/2008 | 04/28/08 | 18:53 - TIDE and PSI were turned off for the last time. |
Last Updated: May 6, 2008